# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = doc DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/../config/accross.m4 \ $(top_srcdir)/../config/acx.m4 $(top_srcdir)/../libtool.m4 \ $(top_srcdir)/../gettext.m4 $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = depcomp = am__depfiles_maybe = SOURCES = INFO_DEPS = $(srcdir)/bfd.info TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo DVIS = bfd.dvi PDFS = bfd.pdf PSS = bfd.ps HTMLS = bfd.html TEXINFOS = bfd.texinfo TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then \ echo $(top_srcdir)/../texinfo/util/texi2dvi; \ else \ echo texi2dvi; \ fi` TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFD_HOST_64BIT_LONG = @BFD_HOST_64BIT_LONG@ BFD_HOST_64_BIT = @BFD_HOST_64_BIT@ BFD_HOST_64_BIT_DEFINED = @BFD_HOST_64_BIT_DEFINED@ BFD_HOST_LONG_LONG = @BFD_HOST_LONG_LONG@ BFD_HOST_U_64_BIT = @BFD_HOST_U_64_BIT@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CC_FOR_BUILD = @CC_FOR_BUILD@ CFLAGS = @CFLAGS@ COREFILE = @COREFILE@ COREFLAG = @COREFLAG@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GT_NO = @GT_NO@ GT_YES = @GT_YES@ HDEFINES = @HDEFINES@ INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_LIBBFD_FALSE = @INSTALL_LIBBFD_FALSE@ INSTALL_LIBBFD_TRUE = @INSTALL_LIBBFD_TRUE@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLDEPS = @INTLDEPS@ INTLLIBS = @INTLLIBS@ INTLOBJS = @INTLOBJS@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POFILES = @POFILES@ POSUB = @POSUB@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TDEFINES = @TDEFINES@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARN_CFLAGS = @WARN_CFLAGS@ WIN32LDFLAGS = @WIN32LDFLAGS@ WIN32LIBADD = @WIN32LIBADD@ XGETTEXT = @XGETTEXT@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ all_backends = @all_backends@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bfd_backends = @bfd_backends@ bfd_default_target_size = @bfd_default_target_size@ bfd_file_ptr = @bfd_file_ptr@ bfd_libs = @bfd_libs@ bfd_machines = @bfd_machines@ bfd_ufile_ptr = @bfd_ufile_ptr@ bfdincludedir = @bfdincludedir@ bfdlibdir = @bfdlibdir@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_noncanonical = @host_noncanonical@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ l = @l@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_noncanonical = @target_noncanonical@ target_os = @target_os@ target_vendor = @target_vendor@ tdefaults = @tdefaults@ wordsize = @wordsize@ AUTOMAKE_OPTIONS = 1.9 cygnus DOCFILES = aoutx.texi archive.texi archures.texi \ bfdt.texi cache.texi coffcode.texi \ core.texi elf.texi elfcode.texi format.texi \ libbfd.texi bfdwin.texi bfdio.texi \ opncls.texi reloc.texi section.texi \ syms.texi targets.texi init.texi hash.texi linker.texi \ mmo.texi PROTOS = archive.p archures.p bfd.p \ core.p format.p \ bfdio.p bfdwin.p \ libbfd.p opncls.p reloc.p \ section.p syms.p targets.p \ format.p core.p init.p IPROTOS = cache.ip libbfd.ip reloc.ip init.ip archures.ip coffcode.ip # SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction # between VPATH and suffix rules. If you use GNU Make, perhaps other Makes, # you don't need these three: SRCDOC = $(srcdir)/../aoutx.h $(srcdir)/../archive.c \ $(srcdir)/../archures.c $(srcdir)/../bfd.c \ $(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \ $(srcdir)/../cache.c $(srcdir)/../coffcode.h \ $(srcdir)/../corefile.c $(srcdir)/../elf.c \ $(srcdir)/../elfcode.h $(srcdir)/../format.c \ $(srcdir)/../libbfd.c $(srcdir)/../opncls.c \ $(srcdir)/../reloc.c $(srcdir)/../section.c \ $(srcdir)/../syms.c $(srcdir)/../targets.c \ $(srcdir)/../hash.c $(srcdir)/../linker.c \ $(srcdir)/../mmo.c SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \ $(srcdir)/../bfd.c $(srcdir)/../coffcode.h $(srcdir)/../corefile.c \ $(srcdir)/../format.c $(srcdir)/../libbfd.c \ $(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \ $(srcdir)/../opncls.c $(srcdir)/../reloc.c \ $(srcdir)/../section.c $(srcdir)/../syms.c \ $(srcdir)/../targets.c $(srcdir)/../init.c SRCIPROT = $(srcdir)/../cache.c $(srcdir)/../libbfd.c \ $(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \ $(srcdir)/../reloc.c $(srcdir)/../cpu-h8300.c \ $(srcdir)/../cpu-i960.c $(srcdir)/../archures.c \ $(srcdir)/../init.c TEXIDIR = $(srcdir)/../../texinfo/fsf info_TEXINFOS = bfd.texinfo MKDOC = chew$(EXEEXT_FOR_BUILD) LIBBFD_H_DEP = \ $(srcdir)/../libbfd-in.h \ $(srcdir)/../init.c \ $(srcdir)/../libbfd.c \ $(srcdir)/../bfdio.c \ $(srcdir)/../bfdwin.c \ $(srcdir)/../cache.c \ $(srcdir)/../reloc.c \ $(srcdir)/../archures.c \ $(srcdir)/../elf.c \ $(srcdir)/header.sed \ $(srcdir)/proto.str \ $(MKDOC) LIBCOFF_H_DEP = \ $(srcdir)/../libcoff-in.h \ $(srcdir)/../coffcode.h \ $(srcdir)/header.sed \ $(srcdir)/proto.str \ $(MKDOC) BFD_H_DEP = \ $(srcdir)/../bfd-in.h \ $(srcdir)/../init.c \ $(srcdir)/../opncls.c \ $(srcdir)/../libbfd.c \ $(srcdir)/../bfdio.c \ $(srcdir)/../bfdwin.c \ $(srcdir)/../section.c \ $(srcdir)/../archures.c \ $(srcdir)/../reloc.c \ $(srcdir)/../syms.c \ $(srcdir)/../bfd.c \ $(srcdir)/../archive.c \ $(srcdir)/../corefile.c \ $(srcdir)/../targets.c \ $(srcdir)/../format.c \ $(srcdir)/../linker.c \ $(srcdir)/../simple.c \ $(srcdir)/header.sed \ $(srcdir)/proto.str \ $(srcdir)/../version.h \ $(MKDOC) noinst_TEXINFOS = bfdint.texi MOSTLYCLEANFILES = $(MKDOC) *.o CLEANFILES = s-* *.p *.ip DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log MAINTAINERCLEANFILES = $(DOCFILES) all: all-am .SUFFIXES: .SUFFIXES: .dvi .html .info .pdf .ps .texinfo $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --cygnus doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool .texinfo.info: restore=: && backupdir="$(am__leading_dot)am$$$$" && \ am__cwd=`pwd` && cd $(srcdir) && \ rm -rf $$backupdir && mkdir $$backupdir && \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ cd "$$am__cwd"; \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ $<; \ then \ rc=0; \ cd $(srcdir); \ else \ rc=$$?; \ cd $(srcdir) && \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; exit $$rc .texinfo.dvi: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2DVI) $< .texinfo.pdf: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2PDF) $< .texinfo.html: rm -rf $(@:.html=.htp) if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $(@:.html=.htp) $<; \ then \ rm -rf $@; \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ else \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ exit 1; \ fi $(srcdir)/bfd.info: bfd.texinfo bfd.dvi: bfd.texinfo bfd.pdf: bfd.texinfo bfd.html: bfd.texinfo .dvi.ps: $(DVIPS) -o $@ $< uninstall-info-am: $(PRE_UNINSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ (if cd "$(DESTDIR)$(infodir)"; then \ echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ else :; fi); \ done dist-info: $(INFO_DEPS) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for base in $$list; do \ case $$base in \ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$base; then d=.; else d=$(srcdir); fi; \ for file in $$d/$$base*; do \ relfile=`expr "$$file" : "$$d/\(.*\)"`; \ test -f $(distdir)/$$relfile || \ cp -p $$file $(distdir)/$$relfile; \ done; \ done mostlyclean-aminfo: -rm -rf bfd.aux bfd.cp bfd.cps bfd.fn bfd.ky bfd.kys bfd.log bfd.pg bfd.pgs \ bfd.tmp bfd.toc bfd.tp bfd.tps bfd.vr bfd.vrs bfd.dvi \ bfd.pdf bfd.ps bfd.html maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done clean-info: mostlyclean-aminfo tags: TAGS TAGS: ctags: CTAGS CTAGS: check-am: check: check-am all-am: Makefile installdirs: install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool dvi: dvi-am dvi-am: $(DVIS) html: html-am html-am: $(HTMLS) info: info-am info-am: $(INFO_DEPS) install-data-am: install-exec-am: install-info: install-info-am install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)" @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ if test -f $$ifile; then \ relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ else : ; fi; \ done; \ done @$(POST_INSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-aminfo \ maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: $(PDFS) ps: ps-am ps-am: $(PSS) uninstall-am: .PHONY: all all-am check check-am clean clean-generic clean-info \ clean-libtool dist-info distclean distclean-generic \ distclean-libtool dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-aminfo \ maintainer-clean-generic mostlyclean mostlyclean-aminfo \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-info-am $(MKDOC): chew.o $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS) $(LOADLIBES) $(LDFLAGS) chew.o: chew.c $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c protos: libbfd.h libcoff.h bfd.h $(srcdir)/bfd.info bfd.dvi: $(DOCFILES) bfdsumm.texi bfd.texinfo # We can't replace these rules with an implicit rule, because # makes without VPATH support couldn't find the .h files in `..'. # We use s-XXX targets so that we can distribute the info files, # and permit people to rebuild them, without requiring the makeinfo # program. If somebody tries to rebuild info, but none of the .texi # files have changed, then this Makefile will build chew, and will # build all of the stamp files, but will not actually have to rebuild # bfd.info. s-aoutx: $(MKDOC) $(srcdir)/../aoutx.h $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../aoutx.h >aoutx.tmp $(srcdir)/../../move-if-change aoutx.tmp aoutx.texi touch s-aoutx aoutx.texi: s-aoutx s-archive: $(MKDOC) $(srcdir)/../archive.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../archive.c >archive.tmp $(srcdir)/../../move-if-change archive.tmp archive.texi touch s-archive archive.texi: s-archive s-archures: $(MKDOC) $(srcdir)/../archures.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../archures.c >archures.tmp $(srcdir)/../../move-if-change archures.tmp archures.texi touch s-archures archures.texi: s-archures # We use bfdt.texi, rather than bfd.texi, to avoid conflicting with # bfd.texinfo on an 8.3 filesystem. s-bfd: $(MKDOC) $(srcdir)/../bfd.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfd.c >bfd.tmp $(srcdir)/../../move-if-change bfd.tmp bfdt.texi touch s-bfd bfdt.texi: s-bfd s-cache: $(MKDOC) $(srcdir)/../cache.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../cache.c >cache.tmp $(srcdir)/../../move-if-change cache.tmp cache.texi touch s-cache cache.texi: s-cache s-coffcode: $(MKDOC) $(srcdir)/../coffcode.h $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../coffcode.h >coffcode.tmp $(srcdir)/../../move-if-change coffcode.tmp coffcode.texi touch s-coffcode coffcode.texi: s-coffcode s-core: $(MKDOC) $(srcdir)/../corefile.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../corefile.c >core.tmp $(srcdir)/../../move-if-change core.tmp core.texi touch s-core core.texi: s-core s-elf: $(MKDOC) $(srcdir)/../elf.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../elf.c >elf.tmp $(srcdir)/../../move-if-change elf.tmp elf.texi touch s-elf elf.texi: s-elf s-elfcode: $(MKDOC) $(srcdir)/../elfcode.h $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../elfcode.h >elfcode.tmp $(srcdir)/../../move-if-change elfcode.tmp elfcode.texi touch s-elfcode elfcode.texi: s-elfcode s-mmo: $(MKDOC) $(srcdir)/../mmo.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../mmo.c >mmo.tmp $(srcdir)/../../move-if-change mmo.tmp mmo.texi touch s-mmo mmo.texi: s-mmo s-format: $(MKDOC) $(srcdir)/../format.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../format.c >format.tmp $(srcdir)/../../move-if-change format.tmp format.texi touch s-format format.texi: s-format s-libbfd: $(MKDOC) $(srcdir)/../libbfd.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../libbfd.c >libbfd.tmp $(srcdir)/../../move-if-change libbfd.tmp libbfd.texi touch s-libbfd libbfd.texi: s-libbfd s-bfdio: $(MKDOC) $(srcdir)/../bfdio.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdio.c >bfdio.tmp $(srcdir)/../../move-if-change bfdio.tmp bfdio.texi touch s-bfdio bfdio.texi: s-bfdio s-bfdwin: $(MKDOC) $(srcdir)/../bfdwin.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdwin.c >bfdwin.tmp $(srcdir)/../../move-if-change bfdwin.tmp bfdwin.texi touch s-bfdwin bfdwin.texi: s-bfdwin s-opncls: $(MKDOC) $(srcdir)/../opncls.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../opncls.c >opncls.tmp $(srcdir)/../../move-if-change opncls.tmp opncls.texi touch s-opncls opncls.texi: s-opncls s-reloc: $(MKDOC) $(srcdir)/../reloc.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../reloc.c >reloc.tmp $(srcdir)/../../move-if-change reloc.tmp reloc.texi touch s-reloc reloc.texi: s-reloc s-section: $(MKDOC) $(srcdir)/../section.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../section.c >section.tmp $(srcdir)/../../move-if-change section.tmp section.texi touch s-section section.texi: s-section s-syms: $(MKDOC) $(srcdir)/../syms.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../syms.c >syms.tmp $(srcdir)/../../move-if-change syms.tmp syms.texi touch s-syms syms.texi: s-syms s-targets: $(MKDOC) $(srcdir)/../targets.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../targets.c >targets.tmp $(srcdir)/../../move-if-change targets.tmp targets.texi touch s-targets targets.texi: s-targets s-init: $(MKDOC) $(srcdir)/../init.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../init.c >init.tmp $(srcdir)/../../move-if-change init.tmp init.texi touch s-init init.texi: s-init s-hash: $(MKDOC) $(srcdir)/../hash.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../hash.c >hash.tmp $(srcdir)/../../move-if-change hash.tmp hash.texi touch s-hash hash.texi: s-hash s-linker: $(MKDOC) $(srcdir)/../linker.c $(srcdir)/doc.str ./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../linker.c >linker.tmp $(srcdir)/../../move-if-change linker.tmp linker.texi touch s-linker linker.texi: s-linker libbfd.h: $(LIBBFD_H_DEP) echo "$(LIBBFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@ for file in $(LIBBFD_H_DEP); do \ case $$file in \ *-in.h) cat $$file >> $@ ;; \ */header.sed) break ;; \ *) echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \ -e 's,$$,. */,' >> $@ ; \ ./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \ esac; \ done libcoff.h: $(LIBCOFF_H_DEP) echo "$(LIBCOFF_H_DEP)" | sed -f $(srcdir)/header.sed > $@ for file in $(LIBCOFF_H_DEP); do \ case $$file in \ *-in.h) cat $$file >> $@ ;; \ */header.sed) break ;; \ *) echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \ -e 's,$$,. */,' >> $@ ; \ ./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \ esac; \ done bfd.h: $(BFD_H_DEP) echo "$(BFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@ for file in $(BFD_H_DEP); do \ case $$file in \ *-in.h) cat $$file >> $@ ;; \ */header.sed) break ;; \ *) echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \ -e 's,$$,. */,' >> $@ ; \ ./$(MKDOC) -f $(srcdir)/proto.str < $$file >> $@ ;; \ esac; \ done echo "#ifdef __cplusplus" >> $@ echo "}" >> $@ echo "#endif" >> $@ echo "#endif" >> $@ # We want install to imply install-info as per GNU standards, despite the # cygnus option. install: install-info # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: