'\"
'\" Copyright (c) 1995 DSC Technologies Corporation
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" @(#) dialogshell.n 1.21 94/12/17 16:04:44
'\" 
.so man.macros
.HS iwidgets::dialogshell iwid
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
iwidgets::dialogshell \- Create and manipulate a dialog shell widget
.SH SYNOPSIS
\fBiwidgets::dialogshell\fI \fIpathName \fR?\fIoptions\fR?
.SH "INHERITANCE"
itk::Toplevel <- iwidgets::Shell <- iwidgets::Dialogshell
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 4c 8c 12c
\fBbackground\fR	\fBcursor\fR	\fBforeground\fR
.fi
.LP
See the "options" manual entry for details on the standard options.
.SH "INHERITED OPTIONS"
.LP
.nf
.ta 4c 8c 12c
\fBheight\fR	\fBmaster\fR	\fBmodality\fR	\fBwidth\fR
.fi
.LP
See the "shell" manual entry for details on the above inherited options.
.LP
.nf
.ta 4c 8c 12c
\fBtitle\fR 
.fi
.LP
See the "Toplevel" manual entry for details on the above inherited options.

.SH "WIDGET-SPECIFIC OPTIONS"
.LP
.nf
Name:	\fBbuttonBoxPadX\fR
Class:	\fBPad\fR
Command-Line Switch:	\fB-buttonboxpadx\fR
.fi
.IP
Specifies a non-negative padding distance to leave between the button group and
the outer edge of the button box in the x direction.  The value may be 
given in any of the forms accpetable to \fBTk_GetPixels\fR.  The default 
is 5 pixels.
.LP
.nf
Name:	\fBbuttonBoxPadY\fR
Class:	\fBPad\fR
Command-Line Switch:	\fB-buttonboxpady\fR
.fi
.IP
Specifies a non-negative padding distance to leave between the button group and
the outer edge of the button box in the y direction.  The value may be 
given in any of the forms accpetable to \fBTk_GetPixels\fR.  The default 
is 5 pixels.
.LP
.nf
Name:	\fBbuttonBoxPos\fR
Class:	\fBPosition\fR
Command-Line Switch:	\fB-buttonboxpos\fR
.fi
.IP
Attaches buttons to the given side of the dialog: \fBn\fR, \fBs\fR, 
\fBe\fR or \fBw\fR.  The default is s.
.LP
.nf
Name:	\fBpadX\fR
Class:	\fBPad\fR
Command-Line Switch:	\fB-padx\fR
.fi
.IP
Specifies a padding distance for the childsite in the X-direction in
any of the forms acceptable to \fBTk_GetPixels\fR.  The default is 10.
.LP
.nf
Name:	\fBpadY\fR
Class:	\fBPad\fR
Command-Line Switch:	\fB-pady\fR
.fi
.IP
Specifies a padding distance for the childsite in the Y-direction in
any of the forms acceptable to \fBTk_GetPixels\fR.  The default is 10.
.LP
.nf
Name:	\fBseparator\fR
Class:	\fBSeparator\fR
Command-Line Switch:	\fB-separator\fR
.fi
.IP
Specifies whether a line is drawn to separate the 
buttons from the dialog box contents in any of the forms
acceptable to \fBTcl_GetBoolean\fR.  The default is true.
.LP
.nf
Name:	\fBthickness\fR
Class:	\fBThickness\fR
Command-Line Switch:	\fB-thickness\fR
.fi
.IP
Specifies the thickness of the separator in any of the forms acceptable
to \fBTk_GetPixels\fR.  The default is 3 pixels.
.BE

.SH DESCRIPTION
.PP
The \fBiwidgets::dialogshell\fR command creates a dialog shell which is a top 
level widget composed of a button box, separator, and child site area.
The class also has methods to control button construction.

.SH "METHODS"
.PP
The \fBiwidgets::dialogshell\fR command create a new Tcl command whose
name is \fIpathName\fR.  This command may be used to invoke various
operations on the widget.  It has the following general form:
.DS C
\fIpathName option \fR?\fIarg arg ...\fR?
.DE
\fIOption\fR and the \fIarg\fRs
determine the exact behavior of the command.  The following
commands are possible for dialogshell widgets:
.SH "INHERITED METHODS"
.LP
.nf
.ta 4c 8c 12c
\fBactivate\fR	\fBcenter\fR	\fBdeactivate\fR
.fi
.LP
See the "shell" manual entry for details on the above inherited methods.
.SH "ASSOCIATED METHODS"
.LP
.nf
.ta 4c 8c 12c
\fBadd\fR	\fBbuttonconfigure\fR	\fBdefault\fR	\fBdelete\fR
\fBhide\fR	\fBindex\fR	\fBinsert\fR	\fBinvoke\fR
\fBshow\fR
.fi
.LP
See the "buttonbox" manual entry for details on the associated methods.
.SH "WIDGET-SPECIFIC METHODS"
.TP
\fIpathName \fBcget\fR \fIoption\fR
Returns the current value of the configuration option given
by \fIoption\fR.
\fIOption\fR may have any of the values accepted by the \fBiwidgets::dialogshell\fR
command.
.TP
\fIpathName \fBchildsite\fR
Returns the pathname of the child site widget.
.TP
\fIpathName\fR \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
Query or modify the configuration options of the widget.
If no \fIoption\fR is specified, returns a list describing all of
the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
information on the format of this list).  If \fIoption\fR is specified
with no \fIvalue\fR, then the command returns a list describing the
one named option (this list will be identical to the corresponding
sublist of the value returned if no \fIoption\fR is specified).  If
one or more \fIoption\-value\fR pairs are specified, then the command
modifies the given widget option(s) to have the given value(s);  in
this case the command returns an empty string.
\fIOption\fR may have any of the values accepted by the \fBiwidgets::dialogshell\fR
command.

.SH "COMPONENTS"
.LP
.nf
Name:	\fBdschildsite\fR
Class:	\fBframe\fR
.fi
.IP
The dschildsite component is the user child site for the dialog shell.  See 
the "frame" widget manual entry for details on the dschildsite component item.
.LP
.nf
Name:	\fBseparator\fR
Class:	\fBframe\fR
.fi
.IP
The separator component devides the area between the user child site and
the button box.  See the "frame" widget manual entry for details on the 
separator component item.
.LP
.nf
Name:	\fBbbox\fR
Class:	\fBButtonBox\fR
.fi
.IP
The bbox component is the button box containing the buttons for the dialog 
shell.  See the "ButtonBox" widget manual entry for details on the 
bbox component item.
.fi

.SH EXAMPLE
.DS
 package require Iwidgets 4.0
 iwidgets::dialogshell .ds -modality none
 
 .ds add OK -text "OK" 
 .ds add Cancel -text "Cancel"
 .ds default OK
 
 .ds activate
.DE
.SH AUTHOR
Mark L. Ulferts
.SH KEYWORDS
dialogshell, dialog, shell, widget